Máy đo lưu lượng định mức từng phần Dynaflox DMDF-OP-A
Hãng sản xuất: Dynaflox Model: DMDF-OP-A - Yêu cầu báo giá
- Liên hệ
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
Độ chính xác: 0.5%~2.0 % F.S
Kích thước ống : DN100~3000
Máy tính lưu lượng
Vỏ: NEMA4x IP65, nhôm
Kích thước: 260L x 193 W x 80 H mm
Nguồn cung cấp: Chuẩn: 110~240 VAC. Chọn: 12~28 VDC
Tín hiệu ra: 4-20mA
Nhiệt độ: -40 + 70 C
Bộ truyền tín hiệu
Vỏ: NEMA4 x [IP65], nhôm
Kích thước: 260L x 193 W x 80 H mm
Nguồn cấp: Chuẩn: 110~240 VAC. Chọn: 12~28 VDC
Tín hiệu ra: 4-20mA
Nhiệt độ: -40 + 70 C
Bộ chuyển đổi vận tốc
Dải đo: 0.05 m/s ~ 12m/s
Loại: Chèn và kẹp trên
Nhiệt độ môi trường lỏng: Chuẩn: -40+121C. Chọn: -40+250 C -40~150 for insertion )
Chiều dài cáp: Chuẩn : 6m . Chọn: 300m
Chất liệu vỏ:
Bộ tiêu chuẩn: Nhôm
Bộ nhiệt độ cao: Nhựa dẻo kỹ thuật
Bộ thép không gỉ : Thép không gỉ
Bộ chèn : Thép không gỉ
Cấp bảo vệ: Std: IP65. Opt: IP68
Bộ chuyển đổi mức độ
Dải đo: 0.15~5.4 m
Nhiệt độ: -40 ~60 C
Nguồn cung: 12-36 VDC
Tín hiệu ra: 4-20mA
Chất liệu vỏ: Nhựa dẻo kỹ thuật
Features:
Excellent low flow rate measurement ability, low to 0.05 m/s
Automatically signal gain adjustment
Superior measurement accuracy
Complete in specifications, and can provide a variety of applications
User-friendly configurations
4-20mA and RS485/MODBUS output, GPRS is optional
Very suitable for large pipe sewage measurement
Has national explosion proof certificate
Flow Calculator
The flow calculator can set the cross-sectional area calculation of partially filled pipe or open channel,
for circular pipe, it only need to input the inner diameter; for open channel, it only need to input the width;
users also can input up to 20 point coordinates of channel to calculate the cross-sectional area
.The flow calculator can display the velocity, level, flow rate and flow totalizer,
and is configured with 4-20mA and RS485/MODBUS output, GPRS is optional.
Transmitter
The transmitter and level transducer output 4-20mA analog signal of the velocity and level,
which are connected to the two external 4-20mA input of flow calculator.
Velocity Transducer
The velocity transducer includes two types: Clamp-on and Insertion, both of them are hot-tapped installation
and demounted online.
When installing the insertion velocity transducer, the pipe can’t be welded directly, such as cement pipe,
ductile iron or other unweldable material, please notify manufacturer for extended velocity transducers
(wall thickness of pipe can be up to 110mm) shown as below. In this case, it also need to install a weldable
(usually carbon steel) hoop shown as below.
Level Transducer
The measurement principle of level transducer: the level transducer uses ultrasonic level meter
of special small-scale and low dead zone to measure the level. When installing the level meter,
user needs to fix a welding base, the height welding base is usually 80~100mm,
so it can ensure a high measurement accuracy.
TECHNICAL SPECIFICATIONS
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch